Raptor 90 3D
 | | Specification:
●Full Length of Fuselage(mm/in.): 55 1/2" (1410mm)
●Full Width of Fuselage(mm/in.): 7 1/2" (190mm)
●Total Height(mm/in.): 18 1/3" (476mm)
●Main Rotor Dia(mm/in.): 63 1/4" (1605mm)
●Tail Rotor Dia(mm/in.): 10 1/4" (260mm)
●Gear Ratio: 8.27:1:4.65
●Full Equipped Weight(g/ lbs.): 10.58 lbs (4800g)
| Introduction:
Top Performer
The Raptor 90 3D was specifically-created for the 3D fanatics with the fantastic Raptor 90 SE as a proven foundation. To save weight, we stripped the machine of all "bling-bling" and then injected the must-have upgrades and options to deliver an extreme 3D helicopter.
The aluminum motor hub, the over-sized paddles and a thick airfoil deliver lightening-fast cyclic-response and rock-solid hover.
In addition, three different Bell-Hiller mixing ratios offer nimble, very nimble, and extremely nimble control responses...
If all-out 3D is your thing, then look no more. | Features:
1. Machined metal main rotor hub |
2. New nonlinear stiffness flapping damper
3. Machined metal bearing blocks for main rotor shaft
4. Aluminum seesaw that permits different flybar ratio
5. Bell-Hiller mixing arms with holes for different control sensitivities
6. 3D paddles of 30g and carbon 3D vertical fin
7. Push-pull system for collective and cyclic pitch control
8. Light weight tail boom bracket
9. 8.27 to 1 gear ratio for 3D flying
|  New decal |  Metal Hub & swashplate |  Metal bearings blocker for main rotor shaft |  SUS push-pull levers |  Light tail boom bracket |  30g light weight paddle & SUS flybar rod |
|
Helicopters 
