Specification:
●Length:1160mm
●Height:410mm
●Main blade length:600mm
●Main rotor diameter:1350mm
●Tail rotor diameter:240mm
●Engine pinion gear:20T
●Autorotation tail drive gear:180T
●Drive gear ratio:8.5:1:4.5(E:M:T)
●Flying weight:Approx. 3200g
●Color carton:72x25.7x12.5cm
●Outer carton:74.5x52.5x39.5cm ,6sets/ctn

Accessories:
●T-REX 600 Nitro kits setX1 set
●600D Carbon fiber bladeX1
●DS610 Digital servoX1
●GP750 Head lock gyro comboX1
●2 In 1 voltage regulator comboX1
●RCE-G600 GovernorX1

High precision metal main rotor assembly

High precision bearing mixing arms

New elevator arm set, high rigidity metal main shaft bearing block

Metal stabilizer belt set

Tail rotor assembly with double bearings and heavy duty tail with thrust bearings

Metal canopy mounting bolt

RCE-G600 Governor

2 In 1 Voltage regulator combo

DS610 Digital servo

DS620 Digital servo

600D Carbon fiber blade

Features :
1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-14° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Highly efficient shaft driven tail design.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●Standard servoX1
●Align 50 engineX1
●50 MufflerX1
●Pitch gaugeX1
●Super starterX1
●Engine fuelX1
●Fuel pumpX1