This powerful turbine can be obtained from  us as a complete system ready for installation.  The engine is equipped with a Starteranflanschung and battery with everything except for the installation and  Operations necessary accessories, including a test run certificate delivered.  The included ProJet - ECU (turbine - control electronics) is specially tailored to the JB 165 and only needs a receiving channel.  We give two years warranty on the entire turbine.  As with all of our products come here from all parts of our own production. The acceleration time of the turbine is very short.  All parts are turned and milled from the solid or.  The surfaces are natural or black anodized.  Many of our customers use the proven 165 and a JB in the competition and are very satisfied.  Models up to 22 kg takeoff weight for the turbine is not a problem.

Delivery:

JB 165 turbine with Starteranflanschung
- ProJet ECU (turbine control electronics), including GSU (Display and Programmer, and all necessary cables, manual)
- Kerosene, gas valves
- Behotec kerosene pump P7-2
- Fuel filter, gas filter, Filzpendel, Clunk faucet, kerosene and gas hoses, spark plug wrench, Tygonschlauch
- Onboard gas tank, or kerosene start system
- TH-1 turbine holder
- Turbine Guide
- Test run - Certificate

Specifications:

- Diameter: 113 mm
- Length: 292 mm
- Weight: 1480g - 3.3 lbs
- max. Shear: 165N - 36.40 lbs @ rpm 120.000
- min. Shear: 7.0 N - 1.5 ~ 1.6 lbs @ 35.000 rpm
- Consumption at max.  550 ml / min
- Exhaust temperature: approximately 680 ° Celsius
- Fuel: Diesel or Jet A1 (+5% turbine oil)
- Acceleration of 35,000 - 120,000 rpm : 4 seconds